BSC95/12 And Sccollar

Product Description

Bi-Metal Switchgear Connector

For stranded sector and circular stranded aluminium conductor.

The CABAC Bi-Metal Switchgear Connector range is designed for terminating aluminium conductors onto a 12mm copper switchgear stem.

The connector consists of a bi-metal lug and a steel clamping collar. The lug is friction welded from the highest quality aluminium (99.6 pure) and copper (99.9% IACS). The aluminium barrel is coated with jointing compound and sealed with a plastic cap. A slot is machined in the copper end of the bi-metal lug into which the 12mm switchgear stem is inserted. A clamping collar incorporating an allen head grub screw applies pressure between the switchgear stem and bi-metal lug to achieve current transfer through this bolted connection. The clamping collar is made from a zinc-plated steel ring and a cut in the ring prevents heat generating eddy currents from flowing in the steel ring.

These connectors are made to Australian dimensions and can be crimped with standard Australian tooling.

Standards and Compliance

AS 4325 Part 1 Australia; IEC France; DIN/VDE Germany; JIS Japan; BS United Kingdom.

Technical Data

Nominal Conductor (mm2): 95
Stranding No./Dia.: 37/1.78
Switchgear Stem Dia. (mm): 12

Conductive Material
Aluminium Sleeve 99.6% pure
Copper Stalk 99.9% pure
Tensile Strength 110 MPa
Ductile Rating 28%
Final Metal State Fully Annealed inc. joint
Joining Method Friction Welding (IEC Std)

Operating Temperature
-40 to +100 deg C

Electrical Properties
Resistivity 2.6 micro-ohm cm (max): aluminium
1.738 micro-ohm cm: copper
Conductivity
61.8% IACS (min): aluminium
99.7% IACS: copper