Jointing Compound Copper 4ml Sachet
Item Number:
EJCCG/4
Packaging Unit:
1 / each
- Copper crimped and bolted connections do not need jointing compound however jointing compound will assist the joint integrity
- Used in high mechanical tension and hostile environments
- Suitable for crimped earthing applications to resist slipping
- 10% suspended copper and 35% 100-mesh silicon carbide
- Handy 4ml sachets - for easy application
Product Information
Product Description
Generally copper crimped and bolted connections do not need jointing compound, however in certain circumstances jointing compound will assist the joint integrity.
EJCCG/4 copper coloured compound is recommended for use where high mechanical tension is applied to the connection. It is made from a urethane derivative of castor oil, with 10% suspended copper (as with EJCC/220), but has 35% 100-mesh silicone carbide added. The silicone carbide acts as a grit to make the surfaces in the joint grip well, while the compound fills voids, and assists conductivity. EJCG/4 is supplied in handy 4ml sachets, since it is generally used as a single shot application with copper 'C' Connectors on earth rods or situations where a sudden power surge can cause mechanical tension.
Please Note: Jointing compounds are made from a non-conductive oil base with suspended particles to suit a particular application. Each compound has specific properties and should only be used as prescribed by the manufacturer for its specific application. If in doubt about the application of a compound, please contact us for assistance.
Technical Data
Base oil - Castor Oil Derivative: 55%
Service Temperature: -40 to 150 degrees Celsius
Dropping Point: 260 degrees Celsius
Thickener: 35% 100 Mesh Silica
Use: High tension copper compound
Packing: 4ml sachet
Loading...
Your ordered quantity for this item is more than what we have in stock.
Stock Availability
| Location | |
|---|---|
Please contact us to know more about this item's availability or possible restock dates.
